10 Pieces - Diy Unfinished Laser Cut Natural Wood Earrings Blanks...

TRAVEL NOTICE I'll be traveling from Wed 3/12 until Mon 3/17. All orders placed after 2PM PST Tues 3/11 will ship out between Tues 3/18 & Wed 3/19.

WEBSITE: JayEmLaserDesigns. com BUSINESS HOURS: MON-FRI 8AM-5PM PST PROCESSING TIME: 3-5 BUSINESS DAYS Material :: Birch Plywood Quantity :: 10 wood pieces Thickness :: 1/8in (3mm) Lightly sanded Hardware not included Size Options (Width x Length) 1.

0in (25mm) x 1. 10in (29mm) 1.

25in (32mm) x 1. 40in (35mm) 1.

50in (38mm) x 1. 65in (42mm) 2.

0in (51mm) x 2. 15in (54mm) 2.

50in (64mm) x 2. 65in (67mm) 3.

0in (76mm) x 3. 20in (81mm) These are laser cut wooden earring blanks that allows you to express your unlimited creativity! These are designed to be earrings or pendants.

Earring holes may be removed/added if needed. Contact us if you would like us to adjust the pieces in any way.

Choose from unfinished natural wood or from our selection of stained colors. We use a semi-transparent stain which will still show the natural wood grain.

The front & the back will be stained. The side will remained unstained, but still slightly darkened by the laser cutter.

Colors in the pictures may vary slightly depending on your monitor or mobile device settings. Contact us for stain samples or custom stain colors (large bulk orders only).

There are minimal burn marks from the laser. The edges will be slightly darkened by the laser.

There may be natural wood grain marks on the surface of the pieces. These may just be darker grain marks or little natural knots in the wood.

These are usually not a problem if you are painting or staining the pieces with a darker stain but if you would prefer your pieces to not have these marks, then let us know. The shade of the wood may vary slightly from piece to piece since this is a natural wood product.

These are meant to be painted, stained, or decorated but the natural wood is also beautiful & can be preserved with a coat of clear sealant. FREE UNFINISHED SCRAP WOOD PIECES AVAILABLE We have scrap wood pieces that were miscut or cut outs from other pieces available for you to test your stains/paints.

Some pieces may not be sanded so you'll want to sand them down a little bit to remove the smoke burn before painting/staining. Just leave a message during checkout if you would like a scrap bag added to your order.

:: FAQs :: 1) CAN YOU REMOVE THE HOLE OR ADD HOLES? Yes, just leave a note during checkout about adjusting the holes 2) CAN THE WOOD BE A DIFFERENT THICKNESS? No, I only use 1/8 thick wood. 3) CAN YOU USE A DIFFERENT KIND OF WOOD? CAN YOU CUT THIS in ACRYLIC, ETC ETC? No, I only use unfinished birch plywood.

4) CAN YOU ENGRAVE ONTO THE WOOD? Yes, there will be an additional charge. Message me for details.

5) WHAT DO YOU USE FOR PACKAGING? I use eco-friendly poly ziplock bags that are biodegradable. in order to reduce the use of packaging, I do package pieces together in the same bags when possible.

Smaller orders are shipped in a recycled bubble mailer while large orders are shipped in a.

Plus more... click below for more details and pricing.